ARS – AIR RECOVERY SYSTEM FOR PET BLOW MOLDING
Recover Up to 50% of Your Compressed Air with ARS
The ARS, developed by Technoplan in Geneva, is a high-precision, stand-alone solution designed to capture and recycle compressed air in PET blow molding machines. Installed between the machine’s exhaust and the plant’s low-pressure system, ARS recovers up to 50% of dry, oil-free compressed air previously wasted to the atmosphere
How It Works
Technoplan’s ARS captures high-pressure and low-pressure exhaust air and stores it in dedicated recovery tanks. This air can be reused for the next blow cycle or integrated into the plant’s working air system, reducing the run time of compressors and operational costs
AIR RECOVERY SYSTEMS
AIR RECOVERY SYSTEMS HP
AIR RECOVERY SYSTEMS + FULL
Performance & Savings
Typical recovery: 102 Nm³/h high-pressure + 277 Nm³/h low-pressure, per hour
Production projection (≈ 6,000 h/year): 60.125 kW/h saved → approximately 360,750 kW/year → €54,110 annual savings (based on €0.15/kWh)
Estimated ROI: 12–24 months, depending on configuration and throughput
Benefits
50% Air Recovery
Reuses up to 50% of blowing air.
Significant Energy Savings
~€54,000 saved per year.
ROI in under 18 Months
Payback in 12–18 months.
Plug and Play Installation
Installed in 3–5 days.
No Impact on Production
No PLC or oven change.
OEM Compatibility
Fits Sidel®, Krones®, SIPA®...
Maintenance Cost Reduction
Less compressor usage.
Swiss Precision Engineering
Designed in Geneva.